Home Contact Us Dealer List Guitar Models Banjo Models Technical Care
Price List Just Shipped the Shop What's Going On

 

Recent Shipments

Below are instruments that have either just been shipped or are soon to be shipped to the Dealer listed.
Give them a call or, better yet, stop in for a visit! 
Support your local music boutique!

please note..."these photos are taken quite quickly and informally in order to make shipping deadlines.
Some glaring and/or color inconsistencies may occur.  Additionally, the calibration of my monitor may not be the same as yours.
Please keep this in mind as you browse.....and thank-you for visiting with us!"

sales information:  mailto:sales@hussanddalton.com

 

 

 

We've recently had several Singletree Old Time banjos
to ship...here is where they were shipped:

Custom Fretted Instruments - Sparta, TN
1 - Standard Singletree
1 - Singletree w/Whyte Laydie

Mountain Music Shoppe - Shawnee, KS
Standard

Fret Mill Music - Roanoke, VA
Singletree w/Whyte Laydie

Artisan Guitars - Franklin, TN
Singletree w/Whyte Laydie

Mandolin Brothers, Ltd. - Staten Island, NY
Singletree w/Tubaphone

 

 

This custom TOM-R has beatiful Brazilian Rosewood back and sides, a Red Spruce top, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Dave at Dave's Guitar Shop

 

This Standard OM has a Sitka Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/Ebony buttons.

Contact Steve at Heinz Musitronics in Charlottesville, VA

 

Missing my camera's eye...
A Standard DS with a Sitka Spruce top,, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

It shipped to Rainbow Music...contact Bill

 

The beauty of the bearclaw!
This is a Custom D-RH with Bearclaw Sitka Spruce topwood, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Call Stan Jay at Mandolin Brothers on Staten Island, NY

 

The Flamed Maple back and side woods are just gorgeous on this CM-12 String non-cutaway.
It also has a Maple neck, Koa body binding, Koa fretboard binding, Koa bound peghead,
and Gotoh Gold tuning machines. Beautiful looks, beautiful sound.

This guitar is also featured in our ad in the September issue of Acoustic Guitar Magazine.

Jeff Looker has a great inventory of H&D instruments at Acoustic Vibes Music

 

This Standard FS has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh 510 mini tuning machines.

Contact Mike at Madison Music

This handsome fellow is the Owens Mill Bluegrass Banjo in beautiful Curly Maple
with sunburst.

Jim Curley is your contact at Mountain Music Shoppe

 

These FOUR guitars are shipping 'over the pond' to England to our Distributor Howard Gillespie @ Oasis Musical Instruments.

At left: A Standard D-RH with Sitka Spruce topwood, Indian Rosewood back and sides, and Gotoh Gold tuning machines.

At right: A Standard FS with Englemann Spruce topwood, Indian Rosewood back and sides, and Gotoh 510 mini tuning machines.

Contact Howard at Oasis Musical Instruments

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons.

Contact Howard at Oasis Musical Instruments

This Standard D-RH has a Sitka Spruce top, Indian Rosewood back and sides, and Gotoh Gold tuning machines.

Contact Howard at Oasis Musical Instruments

 

This is a beautiful, Custom-built for HNH - FS with an Englemann Spruce top, Indian Rosewood back and sides, Abalone top trim, Abalone back trim, long snowflake fret markers, Koa body binding, Koa fretboard binding, and Gotoh 510 tuning machines.

Thanks much to Steve at The Guitar Shop and also HNH!

My photos do not justify the beauty of this Custom FS...it has a Red Spruce top, Indian Rosewood back and sides, Koa body binding, Koa bound fretboard, Abalone top trim, Abalone back trim, sunburst top, and Gotoh 510 tuning machines.

You'll find this beauty at The Guitar Shop

 

This is a Standard D-RH with Sitka Spruce top wood, Indian Rosewood back and sides, and Gotoh Gold tuning machines.

See our friend Gordon at Rudy's Music Stop in NYC

This handsome fellow is a Custom DS with a Red Spruce top, Indian Rosewood back and sides, Koa body binding, Koa fretboard binding, Koa peghead binding, non-sunburst, and Waverly 1129 tuning machines w/butterbean buttons.

Jeff Looker has a great inventory of H&D instruments at Acoustic Vibes Music

This beauty is a Custom DS with a Sitka Spruce top, Mahogany back and side woods, 1-3/4" nut width, Tortoise bound fretboard and body, no aging toner, non-sunburst, and Waverly 1129 tuning machines w/butterbean buttons.

Brian Medas at Guitar Works, Inc. will be happy to assist you.

 

Wow, wow, wow!
This is a Custom TOM-R with incredible Brazilian Rosewood back and sides, Red Spruce top, 24.9" scale length, OOO-sytle Rosette, 2-1/4" saddle spacing, no aging toner, and Waverly 1129 tuning machines w/butterbean buttons.

Visit Robin at The Guitar Gallery

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides, Waverly 4066 tuning machines w/Ivoroid buttons.

Contact Ken at Fret Mill Music

 

This is a Custom TOM-R with a Red Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

DeForest is your contact at The Blue Guitar

This sweet, Custom OO-SP has a European Spruce top, wow Brazilian Rosewood back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons.

It shipped out to AJ & Mike at Madison Music

This Custom DS has a Red Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Dave at Dave's Guitar Shop

 

This Custom TD-R has a Red Spruce top, Indian Rosewood back and sides,and Waverly 1129 tuning machines w/butterbean buttons.

It shipped out to our pal, Gayle at Fretted Productsl

Wow....this beautiful Brazilian piece is a Custom TOM-R with a Red Spruce top and Waverly 1129 tuning machines w/butterbean buttons.

See our man Stan at Mandolin Brothers, Ltd.

 

This Standard OM-C has a Sitka Spruce top, Indian Rosewood back and sidesm, and Gotoh tuning machines w/Ebony buttons.

Visit Bob @ Acoustic Music Revival

This Standard TOM-M has a Sitka Spruce top, Mahogany back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Dave at Stutzman's Guitar Center

This Standard TD-R has a Sitka Spruce top, Indian Rosewood back and sides,and Waverly 1129 tuning machines w/butterbean buttons.

It shipped out to our pal, Gayle at Fretted Products

 

This Custom DS has a Red Spruce top, gorgeous Mahogany back and sides, non-sunburst, Herringbone top trim, Herringbone Rosette, Tortoise body binding, Tortoise fretboard binding, and Waverly 1129 tuning machines w/butterbean buttons.

Contact our friends Bill, Ellie, or W.T. at Artisan Guitars

This is a Custom TD-R with a Red Spruce top, Indian Rosewood back and sides, drop-in saddle, no aging toner, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Richard at Gryphon Stringed Instruments

 

This Standard DS has a Sitka Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Dave, our newest H&D Dealer,
in La Crosse, WI, Dave's Guitar Shop - "'welcome Dave!"

Another beautiful Brazilian piece!

This is a Custom TD-R with a Red Spruce top, Brazilian Rosewood back and sides, no aging toner, and
Waverly 1129 tuning machines w/butterbean buttons.

Contact Jon Garon @ My Favorite Guitars

 

This handsome, Custom TD-R has a Red Spruce top, beautiful Brazilian Rosewood back and sides, no aging toner, and Waverly 1129 tuning machines w/butterbean buttons.

Contact the great folks at Gryphon Stringed Instruments

This Standard OO-SP has an Englemann Spruce top, Indian Rosewood back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons.

Contact our newest H&D Dealer in
La Crosse, WI, Dave's Guitar Shop - "'welcome Dave!"

 

This Custom TD-R has a Red Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Contact our newest H&D Dealer in La Crosse, WI, Dave's Guitar Shop - "'welcome Dave!"

This Custom DS has a Sitka Spruce top, Mahogany back and sides, 1-3/4" nut width, 24.9" scale, low profile neck, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Kate at Maple Leaf Music

This Standard DS has a Sitka Spruce top, Indian Rosewood back and sides, no sunburst, Waverly 1129 tuning machines w/butterbean buttons, and a cool looking Greven pickguard.

See Jeff Looker @ Acoustic Vibes Music

 

This Standard DM has a Sitka Spruce top, Mahogany back and sides, 1-3/4" nut width, light toner and Gotoh Chrome tuning machines.

Contact Brian at Guitar Works, Virginia

This Standard DS has a Sitka Spruce top, Mahogany back and sides and Waverly 1129 tuning machines w/butterbean buttons.

It shipped to Mountain Music Shoppe in Kansas.

Oh the beauty of Maple! This was a custom order for Mr. H...thank-you!
It has a Sitka Spruce top, Maple back and sides, Maple neck, Indian Rosewood body binding, clear pickguard, and Gotoh Gold tuning machines.

Contact

 

This is a left-handed, Custom TD-R with a Red Spruce top, Indian Rosewood back and sides, 1-3/4" nut width and Waverly 1129 tuning machines w/butterbean buttons.

Contact Jerry at Jerry's Lefty Guitars

This left-handed, Custom CM has an Englemann Spruce top, African Rosewood back and sides (beautiful) and Gotoh Gold tuning machines.

Contact Jerry at Jerry's Lefty Guitars

This handsome little Custom OO is also a left-handed guitar and was custom built for TW...thank-you!
It has an Enlgemann Spruce top, Honduran Rosewood back and sides, 1-3/4" nut width, Maple binding, Honduran Rosewood peghead veneer, 2-7/32" saddle spacing, sunburst top, and Waverly 4065 tuning machines w/Ivoroid buttons.
Contact Jerry at Jerry's Lefty Guitars

 

This Standard FS has an Englemann Spruce top, Mahogany back and sides, and Gotoh 510 tuning machines.

This shipped to our Japanese distributor,
Moridaira Musical Instruments...contact Sawaki

This Custom DM has a Cedar top, Mahogany back and sides, Koa body binding, Koa fretboard binding, and Gotoh Gold tuning machines.

It shipped to England to our UK distributor,
Oasis Musical Instruments...contact Howard

This handsome Owens Mill bluegrass banjo has the Burl Walnut option.
It shipped to Mountain Music Shoppe in Kansas.

 

This Custom TD-M has a Red Spruce top, Mahogany back and sides, sunburst top, and Waverly 4060 tuning machines w/Nickel buttons.

Visit the nice folks at Acoustic Outfitters

This Custom DS has a Red Spruce top, beautiful Brazilian Rosewood back and sides, 1-3/4" nut width, no sunburst, and Waverly 1129 tuning machines w/butterbean buttons.

Call Robin at Guitar Gallery in Tennessee

This Standard TOM-R has a Sitka Spruce top, Indian Rosewood back and sides, 1-3/4" nut width, no aging toner, low profile neck, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Kate at Maple Leaf Music

 

 

This Standard D-RH has a Sitka Spruce top, Indian Rosewood back and sides, light aging toner, Rosewood pickguard inside case, 1-3/4" nut width, and Gotoh Gold tuning machines.

Contact Brian at Guitar Works in Virginia

This handsome piece is a Custom TD-R with a Red Spruce top, gorgeous Brazilian Rosewood back and sides, 1-3/4" nut width, low profile neck, no aging toner, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Kate at Maple Leaf Music

 

This Custom FS has an Englemann Spruce top with beautiful Amazon Rosewood back and sides, Stingray fretboard inlays, and Gotoh 510 mini tuning machines.

Contact Aaron at Elderly Instruments

This Standard FS has an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh 510 mini tuning machines.

Contact Bob at Acoustic Music Revival

This Standard DM has a Sitka Spruce top, Mahogany back and sides, and Gotoh Gold tuning machines.

Contact Steve at The Guitar Shop

 

This Custom DS was custom built for GH...thank-you! It has a Sitka Spruce top, Indian Rosewood back and sides, Maple bound peghead, Torch peghead inlay, clear pickguard, Waverly 4065 tuning machines w/Ivoroid buttons..

Contact Gayle at Fretted Products

This is a Custom TD-R with a Red Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Jon or Seth at My Favorite Guitars

This is a sweet little OO-SP with a Sitka Spruce top, Indian Rosewood back and sides, and Waverly 3504 tuning machines w/Snakewood buttons.

Contact Steve at The Guitar Shop

 

This Custom D-RH was custom built for Mr. t...thank-you! It has a Sitka Spruce top, Indian Rosewood back and sides, Maple bound fretboard, Maple bound body, Maple bound peghead, low profile neck and Gotoh Gold tuning machines.

Contact Gayle at Fretted Products

This handsome, Custom DS has a Red Spruce top, Indian Rosewood back and sides, low profile neck, 1-3/4" nut width, and Waverly 1129 tuning machines w/butterbean buttons.

Give Kate a call at Maple Leaf Music

This Custom OOO-SP has a gorgeous Cedar top, Mahogany back and sides, and Waverly 4066 tuning machines w/Ivoroid buttons. (sorry for the smoky image)

Contact Dave at Stutzman's Guitar Center

 

This Custom DS has a Red Spruce top, Mahogany back and sides, 1-3/4" nut width, no sunburst, and Waverly 1129 tuning machines w/butterbean buttons.

Contact Jeff @ The Podium

This Custom DM has a Red Spruce top, Mahogany back and sides, Koa body binding, 1-3/4" nut width, light aging toner, Herringbone top trim, Herringbone Rosette, Gotoh Chrome tuning machines. A custom-made Koa pickguard was made for this guitar and comes with it inside the case.

Contact Brian at Guitar Works, Inc., in Richmond, VA

 

This Standard D-RH has a Sitka Spruce top, Indian Rosewood back and sides, and Gotoh Gold tuning machines.

Visit Steve at The Guitar Shop

 

Here's that beautiful Brazilian again...
This is a Custom Ds with a Red Spruce top, Brazilian Rosewood back and sides,
low profile neck, 1-3/4" nut width, no sunburst, and no aging toner.

Give Kate a call at Maple Leaf Music

This handsome fellow is a Custom TD-M with a Red Spruce top,
Mahogany back and sides, 1-3/4" nut width, narrow taper, 2-7/32" saddle spacing, Herringbone top trim, slotted diamonds and squares fret markers,
TD-R Rosette, Waverly 4060 tuning machines.

custom built for P.S...thanks very much!

The Guitar Shop

 

This Custom TD-R has a Red Spruce top, Indian Rosewood back and sides, and Waverly 4060 tuning machines.

Contact Bob at Acoustic Music Revival

sorry for this bad image...the guitar is a beauty, though! and we thank mr. s and bill.
It's a Custom TOM-M with a Sitka (bearclaw) Spruce top, Mahogany back and sides, short scale 24.9, low profile neck, tortoise body binding, side fret markers @ 3,5,7,9,12, no aging toner, no fretboard inlay, and Waverly 1129 tuning machines w/butterbean buttons.

Artisan Guitars

This Custom OOO has a Red Spruce top, Indian Rosewood back and sides, gorgeous Abalone herringbone Rosette, and Waverly 4060 tuning machines w/Gold buttons.

Visit the folks at Music Folk

 

This Custom CM has an Englemann Spruce top and amazingly beautiful Indian Rosewood back and sides, Koa Rosette,
Koa body binding, Koa neck binding, Koa peghead binding, and Gotoh tuning machines w/Ebony buttons.

Contact Bill or Ellie at Artisan Guitars

 

This Custom TD-R has a Red Spruce top, Indian Rosewood back and sides, Ivoroid neck binding, bound fretboard end, no aging toner, no fretboard inly, installed Nickel strap button, and Waverly 1129 tuning machines w/butterbean buttons.

Visit Dan at Smoky Mountain Guitars

This Custom TD-R has a Red Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Visit with Todd @ Sound Pure

This Custom TD-R has a Red Spruce top with Wow Beautiful Brazilian Rosewood back and sides, 1-3/4 nut width, no aging toner, and Waverly 1129 tuning machines w/butterbean buttons.

Jeff is your man at Podium Music

 

Oh, the beauty...visually and musically!
This is a Custom TOM-M with a Red Spruce top, Koa back and sides, light all-over sunburst,
and Waverly 1129 tuning machines w/butterbean buttons.

Contact Andy at Andysguitars.com

This Standard OM-C has a Sitka Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/Ebony buttons.

It shipped also to Andysguitars.com

 

This is a Standard FS with an Englemann Spruce top, Indian Rosewood back and sides, and Gotoh 510 mini tuning machines.

Visit A Sharp Music

This MJC has a Sitka Spruce top, Indian Rosewood back and sides, bound fretboard end, and Gotoh tuning machines w/Ebony buttons.

Call Steve at Acoustic Music Works in Pittsburgh

This Standard OO-Sp has an Englemann Spruce top, Mahogany back and sides, and Waverly 4066 tuning machines w/Nickel buttons.

Contact Jim Curley at Mountain Music Shoppe

 

This Standard DS has a Sitka Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Give Bill a call at Rainbow Music

This Standard OO has an Englemann Spruce top with Mahogany back and sides, and Waverly 4065 tuning machines w/Ivoroid buttons.

Check out Andysguitars.com

This Standard FS has an Englemann Spruce top,
Indian Rosewood back and sides, and Gotoh 510 mini tuning machines.

Contact Dave at Stutzman's Guitar Center

 

This Standard TD-R has a Sitka Spruce top, Indian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Contact DeForest at The Blue Guitar

This is the sweet Singletree Old Time Banjo.

Contact Jim Grainger @ Custom Fretted Instruments

This one, too, is the Singletree Old Time Banjo with
a custom peghead inlay...a lovely rose.

Give Gayle a call @ Fretted Instruments in Glendora, CA

 

This beauty is a Custom MJ with a Sitka 'bearclaw' Spruce top, Maple back and sides, Maple neck, Koa peghead binding, Koa pickguard, Koa body binding, Koa fretboard binding, bound fretboard end, Koa Rosette w/MJ rings in center, Ebony peghead veneer, trans-black finish all-over, and Waverly 4071-G tuning machines w/Snakewood buttons...WOW!

Contact the good folks at Elderly Instruments

This Brazilian BEAUTY is a Custom TD-R with a Red Spruce top, Brazilian Rosewood back and sides, and Waverly 1129 tuning machines w/butterbean buttons.

Call Andy at Andysguitars.com

 

Shipped out to Germany to Musik-Schmidt were 8 pieces...6 were photographed but two were missed.
They are from top and left:

  • Standard OOO-SP with a Sitka Spruce top, Indian Rosewood back and sides, and Waverly 4060 tuning machines w/Nickel buttons.
  • Standard DM with a Sitka Spruce top, Mahogany back and sides, and Waverly 4060 tuning machines w/Ivoroid buttons.
  • Standard D-RH with a Sitka Spruce top, Indian Rosewood back and sides, and Waverly 4060 tuning machines w/Nickel buttons.
  • Standard CM-12 Fret with an Englemann Spruce top, Indian Rosewood back and sides, 12-fret/24.9" scale, and Gotoh tuning machines w/Ebony buttons.
  • Standard CM-12S with a Sitka Spruce top, Maple back and side wood (gorgeous), 12-string model, Maple neck, and Gotoh tuning machines w/Gold buttons.
  • Standard OM-C with a Sitka Spruce top, Indian Rosewood back and sides, and Gotoh tuning machines w/Ebony buttons.

The two pieces not photographed were at Winter NAMM and just missed the camera's eye!

  • a BEAUTIFUL, Custom MJ with Cedar top wood, Curly Koa back and side wood, Indian Rosewood Rosette, bound peghead, sunburst, Tortoise pickguard, and Gotoh tuning machines w/Ebony buttons.
  • Custom CM with an Englemann Spruce top, Maple back and side wood, Maple neck, Ebony peghead veneer, Ebony bound body, Ebony bound fretboard, Ebony bound peghead, b/w/b purfling lines between veneer and bound peghead, custom Rosette (Eboony & Maple) Celtic, Pearl logo, no fretboard inlays, and black Schaller tuninging machines.

Visit: Musik-Schmidt

 

 

While at Winter NAMM, we met Todd & Chris from Sound Pure, located in Durham, NC.
We signed them up as a new dealer and these pieces above were shipped to them and we welcome them both!

From left to right:
Standard DM with a Sitka Spruce top, Mahogany back and side wood, sunburst top, and Gotoh gold tuning machines.

Custom CM with an Englemann Spruce top, Indian Rosewood back and side wood, 12 fret/24.9" scale,
Maple bound peghead, Maple bound fretboard end, and Waverly 4060 tuning machines w/Nickel buttons.

Custom DS with a Red Spruce top, Indian Rosewood back and side wood, 12 fret/24.9" scale, and
Waverly 4060 tuning machines w/Nickel buttons.

Sound Pure, LLC

 

To top

© 2007 Huss & Dalton Guitar Co., Inc.  All rights reserved.