CM

The Huss and Dalton CM model is perfect whether you are a songwriter needing an inspirational writing tool or a discerning finger stylist, or perhaps a blend of both. Though somewhat smaller than a dreadnought and with deep sides at 4-5/8″, it really packs low-end warmth and response. The elegant design includes a soft Venetian cutaway, body and fretboard bindings of figured maple, an abalone rosette, and an understated 12th-fret scroll fretboard inlay in abalone. The Huss & Dalton CM will give you the full tonal spectrum, as well as the reach to achieve the most complex melody.

Standard woods are Engelmann Spruce top and either Mahogany or Indian Rosewood back and sides.

Standard Appointments

Build Style Radius Top
Top Wood Englemann Spruce
Back/Side Wood Mahogany OR East Indian rosewood
Neck Wood Mahogany
Neck Finish Matte/Gloss face
Truss Rod Access Peghead
Fretboard/Bridge Ebony
Bridge Style Belly
Peghead Veneer/Headplate IRW=IRW / MAH=Ebony
Top Finish Natural
Body Finish Natural
Finish Material Catalyzed Urethane
Body Binding Maple
Fretboard Binding Maple
Peghead Binding None
Top/Trim Purfling B/W/B
Wedge/End Graft Maple
Heel Cap IRW=IRW / MAH=MAH
Backstrip Zipper
Rosette Abalone
Fretboard Inlays 12th Fret Scroll
Peghead Inlay Abalone H&D logo
Pickguard Clear
Tuning Machines Gold H&D w/Gold knobs
Strings D'Addario XTAPB1253 Lights

Standard Dims

Frets 14
Nut Width 1 3/4 inches
Saddle Spacing 2 7/32 inches
Scale Length 25.4 inches
Sound Hole Size 4 3/16 inches
Body Depth 4 5/8 inches
Body Width 15 1/4 inches
Body Length 20 inches
all measurements +-